Aluminum Systems
UG Series
Sliding door system
The UG sliding and lift-sliding structures are intended for residential buildings, mainly private and public buildings.
The system is adapted to the latest requirements relating to thermal performance, aesthetics, and safety. Available system options:
UG low-threshold version, UG – 90 degree angular solution.
The UG system with its parameters makes it possible to design structures with very large dimensions of sliding leaves. The maximum structure dimensions available in the system: Leaf height – Hs = 3300 mm; sash width – Bs = 3200 mm.
This system makes it possible to design large, stable sliding windows and doors: Maximum sash weight – 250 kg sliding options and 400 kg
lift-sliding option.
Structure design: 3, 5, and 7 chamber frames.
Possible variants with two, three, and four components based on the two-rail system.
Profiles suitable for installation of various hand-locked hardware
available on the market and automatic devices.
Various types of infills can be used (double and triple glazed units).
The UG Series is adapted to the latest requirements relating to thermal performance. The system is equipped with 22mm/28mm wide separators,
glass fiber and thermal under-glass inserts to improve cross-sectional thermal performance. Available options: UG, UGi and UGI+.
These large glazing designs provide natural lighting inside the building and facilitate interior design with ensured stability, functionality and structured lightness.
UG-LT Series
The UG-LT Series is characterized not only by its functionality but by its economical and aesthetic solutions. This modern structure lift-sliding hardware provides convenient use, enhanced usefulness, and an elegant design. The low-threshold UG model is a solution to improve building accessibility for disabled people. This option prevents edge offset at the door/floor contact and enables threshold floor flushing.
Characteristic of construction:
- Possible structure variants:
2-, 4- component based on a two-rail frame
- Possible structure variants:
2-component (sash + fix)
4-elements (2 frames + 2 fix)
- Optional to use glazing from the outside, which makes it possible to use large-size,
heavy infills.
- There is possibility of use Flyscreen system ( are a practical and an extremely
functional protection against insects).
UG-AS 90 Series
- The system is designed for large glazed corner.
- Characteristics of construction: two- and three-rail frame.
- Possible structure variants: 4-, 6- and 12-components.
- The system is perfect for commercial and private buildings where open space is required: terraces, porches, sunrooms, patios. The door is opened
by moving the stud that joins the leaves. As a result, the entire room corner is open and the space is not divided by the structural stud. For smaller
glazing solutions, the sliding corner stud increases the clear opening, which significantly improves the comfort of going in/out. - There is possibility of use Flyscreen system – a practical and an extremely functional protection against insects.
G75 Series
Windows and Doors
A modern 75 mm aluminum system was designed for windows and doors requiring exceptional thermal insulation G75 is a system intended for public access buildings, along with a design structure for single and multi-unit residential buildings.
We offer a variety of design options for modern windows/doors and display units that ensure high functionality.
This system incorporates modern insulation materials recently launched on the market. Apart from a conventional central gasket, an additional thermal gasket has also been developed. This unique design allows you to attain extremely tight windows (air infiltration, water-tightness) with its corner-to-corner combination of 90 degrees.
- A hidden sash option is also available.
- Optional Flyscreen system – practical and functional protection against insects.
